ZZZ: Burnice White Foil Print Display and Care Tips

By EXPULSE SHOP | Published: 2026-11-01

Category: Tips & Care

Keep your Burnice White Foil Print looking sharp with practical hanging, sunlight, and cleaning advice for foil art prints, plus a simple care routine that protects the red foil.

Quick answer

Hang your Burnice White Foil Print away from direct sunlight and handle it by the edges. Frame it with a mat or use corner mounts, and dust it gently with a dry microfiber cloth to keep the red foil bright.

Why foil prints need a different care routine

Foil prints have a metallic layer that can dull, scratch, or lift if handled roughly. The Burnice White Foil Print uses red foil on 100lb coated paper, so the surface is smooth but still vulnerable to oils from your fingers and abrasive cleaners. Unlike standard prints, you cannot safely wipe foil with a damp cloth or spray cleaner because moisture can seep under the foil edges. Treat the print as a delicate object: keep it dry, avoid touching the foil area, and minimize exposure to strong light.

When to choose a frame versus other display methods

Framing is the safest option for long-term display because it creates a physical barrier between the foil and the environment. If you prefer a frameless look, use a mount that holds the print without pressing on the foil, such as corner mounts or a top-hanging rail. Avoid clipping the print directly with binder clips or tape, as these can leave marks or tear the paper. For a temporary display, a clear sleeve or portfolio is fine, but remove the print from direct sun.

Step-by-step care and display routine

Unpack and inspect with clean hands: Wash and dry your hands before touching the print. Hold it by the edges and check for any loose foil or creases. Common mistake: touching the printed area with oily fingers, which can leave permanent marks on the foil. Keep a pair of cotton gloves nearby if you handle prints often.
Choose a spot away from direct sunlight: Pick a wall that receives indirect or diffused light. Avoid windowsills, south-facing walls, and areas near strong lamps. Common mistake: hanging the print where morning sun hits it, which can fade the foil over time. Check the spot at different times of day to confirm no direct sun reaches the print.
Frame or mount without pressing on the foil: Use a frame with a mat or acid-free backing, or use corner mounts that hold only the corners. Do not use tape, clips, or adhesive directly on the print. Common mistake: over-tightening frame clips, which can dent the paper. If framing, ask for UV-filtering glass or acrylic to add extra protection.
Dust gently with a dry microfiber cloth: Lightly wipe the surface with a clean, dry microfiber cloth. Never use water, glass cleaner, or abrasive pads. Common mistake: spraying cleaner near the print, which can cause spotting. Dust monthly, or more often in dusty rooms, to prevent buildup.
Store spare prints flat and dry: If you rotate your display, store the print in a acid-free sleeve or between two sheets of clean board, away from heat and moisture. Common mistake: leaving it in a humid basement or attic, which can warp the paper. Label the sleeve with the date so you can track its condition.

Product facts

ZZZ: Burnice White Foil Print: Size: 11 x 17 inch; paper: 100lb coated paper; foil: red. The 11x17 size fits standard frames, and the coated paper resists smudges but still needs gentle handling to protect the red foil.
ZZZ: Burnice White Foil Print