Makima Print Care: Keep Colors and Edges Crisp
By EXPULSE SHOP | Published: 2026-11-04
Category: Tips & Care
A practical routine for keeping your Makima print looking sharp: safe cleaning, smart placement, and edge protection that prevents fading and wear.
Quick answer
Keep your Makima print crisp by hanging it out of direct sun, dusting it with a dry microfiber cloth, and handling the edges only with clean, dry hands. Skip wet cleaners and tape on the print surface.
Why paper weight and coating change your care routine
The Makima Print is made on 100lb coated paper, which gives it a smooth surface but also means it can scuff if you rub it with anything abrasive. Coated paper resists moisture better than uncoated stock, but prolonged dampness can still warp it or cause the coating to cloud. That is why dry methods are safer than wet ones for routine cleaning.
Light card stock is sturdy enough for framing but not rigid like foam board. If you plan to lean the print on a shelf or move it often, support it from behind with a rigid backing to prevent bending.
The fading risk most people miss
UV light is the main cause of print fading, and it reaches prints even in rooms that never feel sunny. A spot that gets a few hours of indirect sun each day can still dull colors over months. Sheer curtains or UV-filtering glass help, but the simplest fix is rotating the print to a wall that stays out of direct light.
Humidity matters too. Bathrooms and kitchens add moisture that can make coated paper curl at the corners. Keep the print in a room with steady, moderate humidity.
Your step-by-step Makima print care routine
- Hang away from direct sun: Choose a wall that gets no direct sunlight. If that is not possible, use a sheer curtain or UV-filtering frame glass. Common mistake: hanging opposite a window that gets strong afternoon sun. Check the spot at different times of day before committing to a nail.
- Dust with a dry microfiber cloth: Wipe gently in one direction, starting from the top. Do not press hard or scrub. Common mistake: using paper towels or tissues, which can leave lint and micro-scratches. If dust sticks, breathe lightly on the surface first, then wipe once.
- Handle edges with clean, dry hands: Lift the print by opposite corners or slide a rigid backing under it. Oils and sweat from fingers can darken paper edges over time. Common mistake: grabbing the print by the middle of an edge, which bends the paper. Wash and dry your hands before any handling, even for a quick move.
- Skip tape and adhesive on the print: Never tape the print directly. Use photo corners or a frame with a mat to hold it in place. Common mistake: using double-sided tape on the back, which can stain or tear the paper when removed. If you must store it loose, place it between two sheets of acid-free board.
- Store flat in a dry place: Keep the print flat, not rolled, and away from damp basements or hot attics. Common mistake: leaving it in a humid room where the coated paper can curl. A flat file or a sturdy box under a bed works well for long-term storage.
Product facts
- Makima Print: 11 x 17 inches on 100lb coated paper. The coated surface wipes clean easily with a dry cloth, but it can scuff if you press hard or use wet cleaners.
Makima Print
